Release 3.0.1 Version (2024/04/10)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added WebAccess/CNC driver block drawing function.
[Feature]
Added block drawings for FANUC FOCAS and FANUC robot.
[Feature]
Added block drawings for HAAS, MITSUBISHI, SYNTEC, FAGOR, LNC, KND and HNC CNC.
[Feature]
Added block drawings for brother CNC (B00, C00 & D00 series).
[Feature]
Added block drawings for Siemens OPC UA and Siemens S7 TCP (840D & 828D
series).
[Feature]
Added block drawings for HEIDENHAIN LSV2 (iTNC 530
& TNC 640 series).
[Feature]
Added block drawings for CNC runtime.
[Feature]
Added brother CNC alarm message files.
Update
feature:
[Feature]
Added the FAGOR CNC of WebAccess/CNC explorer.
[Feature]
Replaced the bwnode.mdb before WebAccess/SCADA V9.1.6.
[Feature]
Added MASTATUS tag for WebAccess CNC driver
Fix
bug:
[Defect]
Fixed the CNC explorer parameters for SYNTEC and KUKA OPC UA.
[Defect]
Modified mode.extvt0 of Mitsubishi CNC driver
Release 2.0.17 Version (2023/10/03)
Software Build Feature
or Fix Description
New feature:
[Feature]
Added brother D00 CNC driver for WebAccess/CNC driver
[Feature]
Added KND CNC driver for WebAccess/CNC driver
[Feature]
Added HEIDEHAIN CNC LSV2 driver for WebAccess/CNC driver
Update
feature:
[Feature]
Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5
[Feature]
Replaced the datacore.exe before WebAccess/SCADA V9.1.5
[Feature]
Enhance Fanuc macro system variables can support common variables and system
variables for WebAccess/CNC driver.
[Feature]
Updated the HEIDENHAIN library files (3.4.SP1)
[Feature]
Added the curncblk for SIEMENS CNC OPC UA
[Feature]
Added MTConnect license in WebAccess/CNC driver
[Feature]
Enhance some CNC analog tag property (.extvt0)
Release 2.0.16 Version (2023/10/03) (*
only for CNC runtime HEIDENHAIN TNC640)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added KND CNC driver for WebAccess/CNC driver
[Feature]
Added HEIDEHAIN CNC LSV2 driver for WebAccess/CNC driver
Update
feature:
[Feature]
Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5
[Feature]
Replaced the datacore.exe before WebAccess/SCADA V9.1.5
[Feature]
Updated the HEIDENHAIN library files (3.4.SP1)
[Feature]
Added the curncblk for SIEMENS CNC OPC UA
[Feature]
Added MTConnect license in WebAccess/CNC driver
[Feature]
Enhance some CNC analog tag property (.extvt0)
Release 2.0.15 Version (2023/06/1)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added SIEMENS CNC OPC UA driver for WebAccess/CNC driver
[Feature]
Adopted the new SkyMars version 3.08 G2.81 for WebAccess/CNC runtime
Update
feature:
[Feature]
Replaced the bwnode.mdb before WebAccess/SCADA V9.1.5
[Feature]
Replaced the datacore.exe before WebAccess/SCADA V9.1.5
[Feature]
Enhanced FAGOR CNC driver for WebAccess/CNC driver
[Feature]
Enhanced LNC CNC driver for WebAccess/CNC driver
Fix
bug:
[Defect]
Fixed the API alarm_current2 for SIEMENS
Release 2.0.14 Version (2022/10/04) (*
only for HEIDENHAIN TNC640)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Special version for HEIDENHAIN controllers based on V2.0.13
[Feature]
Adopted the new SkyMars version 3.074 G3.19 for HEIDENHAIN T640
Update
feature:
[Feature]
Updated HeidenhainDNCLib.dll from V1.5.0 to V1.6.2
Fix
bug:
[Defect]
Fixed the API alarm_current2 for HEIDENHAIN
Release 2.0.13 Version (2023/02/23)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Supported CNC data mapping of WebAccess UTE/OEE option
[Feature]
Supported Microsoft Edge and IE Explorer of WebAccess/CNC explorer
[Feature]
Adopted the new SkyMars version 3.077 G2.8 for WebAccess/CNC runtime
Update
feature:
[Feature]
Added WebAccess/CNC runtime parameters to the bwnode.mdb instead of bwcfg.mdb
[Feature]
Added the default password for CNC runtime of WebAccess/CNC explorer
[Feature]
Replaced the bwnode.mdb before WebAccess/SCADA V9.1.4
[Feature]
Substituted IE WebAccess client with WebAccess edge client
Fix
bug:
[Defect]
Fixed HNC parameter display in the WebAccess/CNC explorer
[Defect]
Fixed Fanuc 2nd path NC download bug of the WebAccess/CNC driver
Release 2.0.12 Version (2021/12/01)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added HNC CNC driver for WebAccess/CNC driver
[Feature]
Added FANUC RS232 driver (DPRNT) for WebAccess/CNC driver
Update
feature:
[Feature]
Adjusted the emergency’s address setting of MITSUBISHI CNC driver
[Feature]
Added Haas CNC tags about the spindle information
Fix
bug:
[Defect]
Added the MITSUBISHI block’s text points of WebAccess/CNC driver
[Defect]
Fixed some CNC automatically generate block bug of WebAccess/CNC explorer
V2.0.11
Release 2.0.11 Version (2021/07/01)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added MITSUBISHI CNC driver for WebAccess/CNC driver
[Feature]
Added KUKA robot OPC UA driver for WebAccess/CNC driver
[Feature]
Adopted the new SkyMars version 3.076 G2.8 for WebAccess/CNC runtime
[Feature]
Added WebAccess CNC driver installation item for WebAccess/SCADA V8.x & V9.x
version compatibility.
Update
feature:
[Feature]
Enhanced FANUC CNC driver including the tool’s life, the path number function for
WebAccess/CNC driver
[Feature]
Adjusted the address setting with PLC’s data type of FANUC CNC driver
[Feature]
Adjusted SIEMENS CNC driver for WebAccess/CNC driver
[Feature]
Supported the main program of SIEMENS CNC for WebAccess/CNC runtime
[Feature]
Adjusted FANUC alarm message folder for current alarm and history alarm of
WebAccess/CNC runtime
[Feature]
Adjusted the WebAccess/CNC explorer for CNC driver setting
Fix
bug:
[Defect]
Fixed the offset bug of WebAccess/CNC explorer V2.0.10
Release 2.0.10 Version (2020/09/22)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Adopted the new SkyMars version 3.081 G2.76 for WebAccess/CNC runtime
[Feature]
Added OKUMA CNC driver for WebAccess/CNC driver
[Feature]
Added SIEMENS CNC driver for WebAccess/CNC driver
Update
feature:
[Feature]
Enhanced FANUC CNC driver for WebAccess/CNC driver
[Feature]
Removed the maintain function & the tool function in the WebAccess/CNC
runtime web functions.
Fix
bug:
[Defect]
Fixed the SkyMars API memory issue
Release 2.0.9 Version (2020/5/22)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Adopted the new SkyMars version 3.074 G2.76 for WebAccess/CNC runtime
[Feature]
Added FAGOR CNC driver for WebAccess/CNC driver
[Feature]
Added RODERS CNC driver for WebAccess/CNC driver
Update
feature:
[Feature]
Enhanced BROTHER CNC driver for WebAccess/CNC driver
[Feature]
Enhanced HAAS CNC driver for WebAccess/CNC driver
[Feature]
Enhanced FANUC CNC driver for WebAccess/CNC driver
Release 2.0.8 Version (2020/3/13) (*
only for HEIDENHAIN TNC640)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added HAAS CNC driver for WebAccess/CNC driver
[Feature]
Added SYNTEC CNC OPC UA driver for WebAccess/CNC driver
[Feature]
Added FANUC Robot driver for WebAccess/CNC driver
Update
feature:
[Feature]
Adjusted the WebAccess/CNC Explorer for CNC driver setting
[Feature]
Adopted the new SkyMars version 3.074 G3.14 for HEIDENHAIN T640
Release 2.0.7 Version (2019/1/25)
Software Build Feature
or Fix Description
Update
feature:
[Feature]
Adopted the new SkyMars version 3.074 G2.74 for WebAccess/CNC runtime
Release 2.0.6 Version (2018/12/12)
Software Build Feature
or Fix Description
Fix
bug:
[Defect]
Updated the VCDLL.dll for the MITSUBISHI CNC
Update
feature:
[Feature]
Adopted the
HEIDENHAIN Library V1.3.8 for iTNC 530 only
Release 2.0.5 Version (2018/10/30) (* only
for HEIDENHAIN TNC640)
Software Build Feature
or Fix Description
Fix
bug:
[Defect]
Fixed the SkyMars API “SKY_conn_status_single”
Update
feature:
[Feature]
Adjusted the device setting that not support iTNC530
[Feature]
Adopted the
HEIDENHAIN Library V1.6.3 for TNC 640 only
Release 2.0.4 Version (2018/10/30)
Software Build Feature
or Fix Description
Fix
bug:
[Defect]
Fixed the SkyMars API “SKY_conn_status_single”
Update
feature:
[Feature]
Adjusted the device setting that not support TNC640
[Feature] Adopted the HEIDENHAIN
Library V1.3.8 for iTNC 530 only
Release 2.0.3 Version (2018/10/22)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added the FOCAS driver for WebAccess/CNC driver
[Feature]
Added the HEIDENHAIN PLC address mapping of the device setting for
WebAccess/CNC runtime
Fix
bug:
[Defect]
Fixed the FANUC PLC write function bug by PMC
[Defect]
Fixed the MITSUBISHI macro function bug by PMC
[Defect]
Fixed the HEIDENHAIN block parameters
Update
feature:
[Feature]
Adjusted the WebAccess/CNC Explorer for CNC driver setting
[Feature]
Adjusted the reading method of the FANUC almmessage.ini
[Feature]
Adopted the new HEIDENHAIN Library for iTNC 530 &
TNC 640
Release 2.0.2 Version (2018/06/13)
Software Build Feature
or Fix Description
New
feature:
Fix
bug:
[Defect]
Fixed the error determination of brother CNC when using auto searching function
of LNC CNC
Update
feature:
Release 2.0.1 Version (2018/05/22)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Adjusted memory size of each connection
Fix bug:
[Defect]
Fixed the MITSUBISHI M70 program list bug by PMC
Update
feature:
Release 2.0.0 Version (2018/05/15)
Software Build Feature
or Fix Description
[Driver]
Added the brother CNC driver B00/C00
[Driver]
LNC CNC driver is free for WebAccess/SCADA V8.3.1 later
[Feature]
Added the auto discovery function for brother controller
Fix
bug:
[Defect]
Fixed the program display/upload/download bug
[Defect]
Fixed the incomplete installation problem
[Defect]
Added the default alarm message after explorer process
[Defect]
Fixed only the ten devices showing problem in the explorer tool
Update
feature:
Release 1.0.17 Version (2018/02/09)
Software Build Feature
or Fix Description
New
feature:
Fix
bug:
[Defect]
Fixed only the first alarm display in the LNC driver
Update
feature:
Release 1.0.16 Version (2018/01/22)
Software Build Feature
or Fix Description
New
feature:
Fix
bug:
[Defect]
Fixed the installation problem showing "install CNC Runtime error" in
some OS Update feature:
Release 1.0.15 Version (2018/01/09)
Software Build Feature
or Fix Description
New
feature:
Fix
bug:
[Defect]
Fixed the SkyMars registers are not wrote correctly
in WIN10
Update
feature:
Release 1.0.14 Version (2018/12/05)
Software Build Feature
or Fix Description
New feature:
[Feature]
Added the runtime & explorer options in the installation interface
[Feature]
Added the PLC status of SIEMENS drivers
Fix
bug:
[Defect]
Fixed the crash problem when no device choosing in the device setting
[Defect]
Modified the availability calculation method of the overview
Update
feature:
[Update]
Added the display of the CurrSeq and CurNcPtr at the same time
[Update]
Added the parameter "FNcPath" for FTP path
in CNC
Release 1.0.13 Version (2017/11/06)
Software Build Feature
or Fix Description
New
feature:
Fix
bug:
[Defect]
Fixed the project can't be established in the explorer process when the device
parameters has been changed
[Defect]
Fixed the program list issue of driver
Update
feature:
Release 1.0.12 Version (2017/10/19)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Used the MSI package
Fix
bug:
[Defect]
Fixed the problem that some SkyMars registers can't
be wrote
Update
feature:
[Update]
Adjusted the Japanese explanations of the interface
Release 1.0.11 Version (2017/10/18)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added the writing function of LNC tags
[Feature]
Added the display of the NC program block
Fix
bug:
[Defect]
Fixed the bug that the tags established by the user won't be covered after the
explorer process again
[Defect]
Fixed the display of the executed NC program block of FANUC, SIEMENS & MITSUBISHI
& HEIDENHAIN
[Defect]
Fixed the complete tips of using FTP functions are showing too early
Update
feature:
Release 1.0.10 Version (2017/08/02)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added auto discovery function for LNC controller
[Feature]
Added the display of the NC program block
[Feature]
Added the parameter "MNc path" to control
the NC path of CNC memory
Fix
bug:
Update
feature:
Release 1.0.8 Version (2017/06/03)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added Japanese interface
[Feature]
Added the curve of the spindle speed
[Feature]
Increased the display of 75 G Code
[Feature]
Added the filter function of history alarm and message
Fix
bug:
[Defect]
Fixed the API garbled problem
[Defect]
Fixed the IIS problem that the parameter can't be changed when APP Pool is
existing
Update
feature:
Release 1.0.7 Version (2017/02/17)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added the LNC controller driver
Fix
bug:
[Defect]
Fixed the extra characters of SkyMars connecting to
M80
[Defect]
Fixed the same IP querying by custom & communication issue of SkyMars
[Defect]
Fixed MITSUBISHI M80 macro variables can't be search
[Defect]
Fixed SkyMars APISET_toolmanage_single_cycletime
can't be wrote
[Defect]
Fixed the reopen issue of CNC runtime
[Defect]
Fixed the axis unit of information
Update
feature:
Release 1.0.6 Version (2016/12/27)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Adjusted the max axis number to 12
Fix
bug:
[Defect]
Fixed MITSUBISHI issues from PMC
[Defect]
Fixed the adding and modifying functions of device setting
[Defect]
Changed the decimal 4 digits of axis position
[Defect]
Fixed the displaying problem of the max loading of servo axis
[Defect]
Fixed the display problem of the feed rate
Update
feature:
Release 1.0.5 Version (2016/11/22)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added the wrong alarm message in SkyMars for FANUC
Fix
bug:
[Defect]
Fixed the one MITSUBISHI connection problem from PMC
[Defect]
Fixed the UpMPgm function bug
[Defect]
Fixed the driver become slow problem when switching bgr
Update
feature:
Release 1.0.3 Version (2016/11/01)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added MITSUBISHI-EZ controller
[Feature]
Added the offset API for FANUC and MITSUBISHI
[Feature]
Added the macro API for FANUC and MITSUBISHI
[Feature]
Added the spindle and servo temperature API
[Feature]
Added the directly entering machine information page without using overview
page
Fix
bug:
[Defect]
Fixed the old device problem in explorer process
[Defect]
Fixed the writing function of working coordinate
[Defect]
Fixed the adding new program can't be saved
[Defect]
Fixed the exception error message when FANUC working coordinate is saving
[Defect]
Fixed HEIDENHAIN Parameter/PRESET problem that showing please waiting
[Defect]
Fixed the bug of querying availability interface
[Defect]
Fixed the driver crash when the name is different of device setting and project
node and SCADA noder
Update
feature:
Release 1.0.2 Version (2016/08/01)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added the excel export function of alarm and parameter setting
[Feature]
Added the re check function when uploading files and writing parameters
[Feature]
Added the action log function when uploading files and writing parameters
[Feature]
Added the enable/disable function of menu functions
Fix
bug:
[Defect]
Fixed the wrong display of executing status
[Defect]
Fixed the availability calculation bug
[Defect]
Fixed the problem when start runtime of the device setting interface
Update
feature:
Release 1.0.1 Version (2016/07/15)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Added SkyMars no UI version
[Feature]
Added Multi language interface
Fix
bug:
Update
feature:
Release 1.0.0 Version (2016/06/16)
Software Build Feature
or Fix Description
New
feature:
[Feature]
Integrated SkyMars to support FANUC, MITSUBISHI,
HEIDENHAIN, SIEMENS controller
Fix
bug:
Update
feature: